What are the different operating modes of the Tycam Guard projector (LED beam)?

Colour night vision requires that the spotlight be activated in the dark. The spotlight can be activated in 3 ways:Permanently at night, configurable from the camera image settings in the Tydom app: LED intensity adapts... Continue reading

What is privacy mode and how does it work?

Protect your family's privacy by choosing not to stop all recording, with just one click. Disable your Tycam Guard or Tycam Home camera at any time.There are 2 Privacy mode levels that can be... Continue reading

I already have outdoor sensors - can I make use of the pre-alarm alert notification?

Yes, if you have a Tydom 2.0 or a smart hub (Tydom Home, Tydom Pro, Tywell Pro), as well as a Tyxal+ alarm control panel (CS2000 or CS8000), and at least version 4.8 of... Continue reading

If I have a CS2000 or CS8000 alarm control panel, is it possible to store a history of incidents?

The pre-alarm incident history (which can be consulted via the CLT8000 keypad and via the Tydom app) is available for any new alarm control panel installation (CS2000 and CS8000 products from February 2023 onwards). Continue reading

What are the benefits of outdoor protection: the control panel's pre-alarm mode in combination with outdoor sensors?

Protect your outdoor areas from any risk of intrusion.Benefit from outdoor protection that is immune from triggering on account of the presence of animals.Be alerted to any incidents, even when not at home, thanks... Continue reading

I have an alarm system, how can I upgrade my installation with outdoor sensors?

The DME- DMBE, DME90-DME180-DMF are compatible with the CS2000 and CS8000 control panels Continue reading

Important information concerning the Lifedomus product range

Dear customer,You have upgraded or purchased the Lifedomus product range in recent years, and we would like to thank you for this. This product range has represented a response to the enhancement of high-end... Continue reading

How long is my consumption data measured from an Easy smart plug kept for

They are kept for 3 years with a history of the last 8 days, last 10 weeks and last 25 months.  Continue reading

When I measure the consumption of an electrical equipment, does the displayed measurement correspond only to this device or to that of the Easy smart plug and the electrical equipment?

The measurement only corresponds to the device connected to the Easy smart plug. Continue reading

Is the Easy smart plug compatible with a load of an electric vehicle?

Yes, however you must check the amperage of the charger. For slow-charge in single-phase, it goes up to 16A max. This smart plug is not compatible with specific sockets. Continue reading